Location: Home >> Products >> Industrial Wireless >> Industrial Wireless AP/Bridge/Client >> AWK-1100 Series

AWK-1100 Series

Industrial IEEE 802.11g/b Wireless Access Point/Bridge/AP Client

Datasheet
Manual
Drivers & Software
Larger image
 


Features
Specifications
Ordering Information

Features and Benefits


  • IEEE 802.11g/b compliant
  • Power input by redundant 24 VDC power inputs or Power-over-Ethernet
  • Powerful security with WPA/802.1X/MAC address filtering
  • DIN-Rail or panel mounting ability
  • IP30 protected high-strength metal housing

Introduction

Are your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over a TCP/IP network? If so, then the AWK-1100 Access Point/Bridge/AP Client could be what you're looking for. The AWK-1100 is rated to operate at temperatures ranging from 0 to 60°C and is rugged enough for any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting ability, wide operating temperature range, and IP30 housing with LED indicators make the AWK-1100 a convenient yet reliable solution for any industrial wireless application.

Advanced Security Capability
  • 64-bit and 128-bit WEP (Wired Equivalent Privacy)
  • Enable/disable SSID broadcasts
  • MAC-address-based access control
  • IEEE 802.1X/RADIUS
  • WPA (Wi-Fi Protected Access)
Useful Utilities and Remote Configuration
  • Firmware upgrade from TFTP or HTTP
  • Web-based Management
  • Supports SNMP and UPnP
  • Configuration backup and reset

More info >>

•  WLAN:
StandardsIEEE 802.11g/b for Wireless LAN
IEEE 802.3u 10/100BaseT(X) for Ethernet LAN
IEEE 802.3af for Power-over-Ethernet
Frequency Range2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Data Rate & ModulationOFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, and DBSK @ 1 Mbps
Operating ChannelsUSA: 1-11 (US)
Europe: 1-13 (EU)
Japan: 1-14 (JP)
Security64-bit and 128-bit WEP encryption, WPA (IEEE 802.1X/RADIUS and TKIP)
Data Rates1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps
Transmit PowerTyp. +18 dBm (+/- 1.5 dBm) @ 11 Mbps, +14 dBm (+/- 1.5 dBm) @ 54 Mbps
RX Sensitivity802.11b:
-81 dBm @ 11 Mbps, -85 dBm @ 5.5 Mbps, -86 dBm @ 2 Mbps, -87 dBm @ 1 Mbps

802.11g:
-68 dBm @ 54 Mbps, -70 dBm @ 48 Mbps, -74 dBm @ 36 Mbps,
-78 dBm @ 24 Mbps, -81 dBm @ 18 Mbps, -84 dBm @ 12 Mbps,
-85 dBm @ 9 Mbps, -86 dBm @ 6 Mbps


•  Software:
ProtocolsHTTP, DHCP, TCP/IP, RADIUS
ConfigurationWeb-based management
Client OS SupportWindows (95, 98, 2000, ME, NT, XP), Unix,
Macintosh


•  Interface:
Antenna 2 dBi omni-directional antenna with an RP-SMA connector
RJ45 Ports10/100BaseT(X) auto negotiation speed
LED IndicatorsPWR1, PWR2, WLAN, LAN (Link/ACT)


•  Power Requirements:
Input Voltage12 to 45 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE802.3af)
Power Consumption0.3 A @ 24 V
Overload Current Protection1.6 A
ConnectionRemovable terminal block
Reverse Polarity ProtectionPresent


•  Physical Characteristics:
Housingmetal, providing IP30 protection
Weight 800g
Dimensions53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)
InstallationDIN-Rail mounting, wall mounting (optional kit)


•  Environmental Limits:
Operating Temperature0 to 60°C (32 to 140°F)
Storage Temperature-20 to 70°C (-4 to 158°F)
Ambient Relative Humidity5% to 95% (non-condensing)


• Regulatory Approvals
SafetyEN60950-1, UL60950-1
EMIFCC Part 15C
EMCEN301 489-1/-17
Hazardous LocationUL/cUL Class I, Division 2, Groups A, B, C,
and D; ATEX Class I, Zone 2, EEx nC IIC (Pending)
RadioEN300 328


• Reliability
MTBF (meantime between failures)200,000 hrs
database: MIL-HDBK-217F, GB 25°C


•  Warranty:
Warranty Period5 years
DetailsSee www.moxa.com/warranty



To request a quote, indicate which items you are interested in below and click "Get a Quote".
IEEE 802.11a/b/g 2.4 & 5 GHz Dual-band Antenna
 Model No. Description

ANT-WDB-O-2

2.4-2.5 GHz & 4.9-5.8 GHz, RP-SMA male connector

IEEE 802.11b/g 2.4 GHz Antennas
 Model No. Description

ANT-WSB-O-02

2.4-2.5 GHz, 1/4λ Dipole Sleeve, 2 dBi, RP-SMA male connector

ANT-WSB-O-5-150

2.4-2.5 GHz, 1/4λ Dipole Sleeve, 5 dBi, RP-SMA male connector

ANT-1-O-09

2.4-2.5 GHz, omni-directional, 9 dBi, N-type (female) connector

ANT-1-D-12

2.4-2.5 GHz, directional / Flat Panel, 12 dBi, N-type (female) connector

Available Models
 Model No. Description

AWK-1100-US

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, US band

AWK-1100-EU

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, Euro band

AWK-1100-JP

IEEE 802.11g/b Wireless AP/Bridge/AP Client, 0 to 60°C, Japan band

DIN-Rail Power Supplies
 Model No. Description

DR-4524

45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-75-24

75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-120-24

120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch

Mounting Kits
 Model No. Description

HA-1002SU

Swivel Mounting Kits, swivel angle 90° horizontal, 40° vertical

RK-4U

4U-high 19” rack mounting kit

WK-46

Wall Mounting Kit

Accessories - Wireless Antennas
 Model No. Description

ANT-1-O-09

2.4 GHz, omni-directional, 9 dBi Antenna, N-Female connector

CRF-N0117SA-3M

CFD200 cable, N-Male to RP SMA Male connector, 3 meters (for AWK-1100)

ANT-1-D-12

2.4 GHz, directional, 12 dBi Antenna, N-Female connector

HA-1002SU

Swivel Mounting Kits, swivel angle 90° horizontal, 40° vertical

P/N:9199000004000

IEEE 802.11b/g Wireless LAN

P/N: 1710010100110

5 GHz 5dBi SMA Antenna

Accessories - Wireless Antennas 2.4 GHz
 Model No. Description

ANT-1-O-09

2.4 GHz, omni-directional, 9 dBi Antenna, N-Female connector

ANT-WSB-O-5-150

2.4 GHz 5dBi SMA Antenna

ANT-1-D-12

2.4 GHz, directional/Flat Panel, 12 dBi, N-type (female) connector

Accessories - Wireless Antennas 5 GHz
 Model No. Description

ANT-WDB-O-02

2.4-2.5 GHz & 4.9-5.8 GHz, RP-SMA (male) connector